Recommended Products
Shop
Showing 1–48 of 53 results
-
Drink Holders
Chubby Cups Drink Holder
Fits Most Motorcycles and ATVs
- 6 way mounting system
- Clamp is 1-1/2″
- Comes with 3 Sleeves – 1-1/4″, 1″ and 7/8″
- One Liter Clamp on Drink Holder
- 90 Degree Elbow
- Fits 7/8″, 1″ or 1-1/4″ or 1-1/2″ Bars
- Stainless Steel Spacer
- 3 Foam Liners
- 2 Washers
- Allen Screw Wrench
SKU: 1664$70.00 Select options -
Drink Holders
Chubby Cups Jr Rigid Drink Holder
Fits Most Motorcycles and ATVs
- 6 way mounting system
- Clamp is 1-1/2″
- Comes with 3 Sleeves – 1-1/4″, 1″ and 7/8″
- One Liter Clamp on Drink Holder
- 90 Degree Elbow
- Fits 7/8″, 1″ or 1-1/4″ or 1-1/2″ Bars
- Stainless Steel Spacer
- 3 Foam Liners
- 2 Washers
- Allen Screw Wrench
- Available in Chrome or Black
SKU: n/a$60.00 Select options -
Drink Holders
Quick Release Drink Holder
- Fits Most Motorcycles and ATVs
- 4 Level – 64 Gear Positions
- Stainless Steel Hardware
- Built in Gripper Pads
- Fits 1/2″ to 2″ Bars
- 20 Ounce to 1 Liter Cans or Bottles
- Flat Black (shown here) $20
- AVAILABLE IN 4 ADDITIONAL COLORS! – Add $10
NOTE: Every Quick Release Includes Built In Gripper Pads
CHECK OUT OUR SHORT DEMO VIDEO BELOW
SKU: n/a$20.00 Add to cart -
Drink Holders
Rigid Drink Holder -’14-UP Ultra & Street Glide NEW!
Fits ’14-UP Harley Ultra & Street Glide equipped with 1″ Factory bars
- Fits easily on the handle bar between the bar and the hydraulic clutch cylinder
- Rigid mounted and will not block any gauges
- The cup has 2 liners that will accommodate 12 oz cans up to 24 oz bottles
- Available in Black or Chrome
SKU: 1692$60.00 Select options -
Drink Holders
Road Glide Drink Holder ’15-Up
Chubby Cup Rigid Drink Holder – Road Glide – 2015-UP
ONLY DRINK HOLDER ON THE MARKET THAT WILL NOT SCORE YOUR BAR.
Rigid mounted and will not block any gauges
The cup has 3 liners that will accommodate 1 liter, 20oz and 16.9oz bottles / cans
Comes with 1-1/2″ clamp with a 1-1/4″ reducer
Available in Black or ChromeSKU: n/a$70.00 Select options -
Drink Holders
Tour Pack Drink Holder ’13-Earlier
- Available in Chrome Finish – Mounts on Right Side
- Comes with bracket, chrome acorn nuts and stainless hardware
- One liter cup with 3 foam liners and instructions for mounting
- Fits all Harley-Davidson Touring Bikes with Tour Pak.
- Accommodate one liter bottles, 16 or 20 oz bottles, or 12 oz cans
- Fits 2013 – Earlier
SKU: 1690-OR$80.00 Add to cart -
Drink Holders
Tour Pack Drink Holder ’14-‘UP
- Available for right side
- Comes with bracket, chrome acorn nuts and stainless hardware
- One liter cup with 3 foam liners and instructions for mounting
- Fits all Harley-Davidson Touring Bikes with Tour Pak
- Accommodate one liter bottles, 16 or 20 oz bottles, or 12 oz cans
- Fits 2014 – UP
SKU: 1691$80.00 Add to cart -
Drink Holders
Switch Mount Drink Holder
Fits Most Motorcycles
- Rigid
- Includes Hardware for Mounting to Most Bikes
- Includes 2 Spacers
- 3 Foam Insulated Liners
- Fits all Harley-Davidson Bikes
- Accommodate one liter bottles, 16 or 20 oz bottles, or 12 oz cans
- Comes with 2 sets of 1/4″x 20 screws and also has metric screws to fit Honda and most metric bikes
- Comes with 2 attachment plates – One 90 degree and one forward plate
SKU: 1643$60.00 Select options -
Cell Phone / iPhone Holders
iPhone 4 Holder
Note: For Phones with Otterbox Defender. Phone Holder Only
- Comes with 1-1/4″ clamp with 1″ sleeve and elbow
- Fits 1″ Handlebars
- Works with Harley-Davidson, Honda, Kawasaki, Suzuki, or Yamaha/Star
- 1 1/4″ clamp with 1″ sleeve. 90 degree elbow with stainless steel nut.
Available in chrome finish. Designed for the iPhone® 4 only. Installation is less than 10 minutes. iPhone® not included.
SKU: CC-102$125.00 Select options -
Cell Phone / iPhone Holders
iPhone 5 Holder
Note: For Phones with Otterbox Defender. Phone Holder Only
iPhone holder is precision manufactured in the USA from high quality U.S. materials. Available in chrome and black finish. Designed for the iPhone 5/5s. Installation is less than 10 minutes.
Fits: For Harley Davidson Motorcycles & Metric Cruisers
Includes: 1 1/4″ clamp with 1″ sleeve. 90 degree elbow with stainless steel nut.
Provides access to both the auxiliary and charging ports
SKU: n/a$125.00 Select options -
Cell Phone / iPhone Holders
iPhone 6 Holder
Note: For Phones with Otterbox Defender. Phone Holder Only
iPhone holder is precision manufactured in the USA from high quality U.S. materials. Available in chrome and black finish. Designed for the iPhone 6. Installation is less than 10 minutes. Installation is less than 10 minutes.
Fits: For Harley Davidson Motorcycles & Metric Cruisers
Includes: 1 1/4″ clamp with 1″ sleeve. 90 degree elbow with stainless steel nut.
Provides access to both the auxiliary and charging ports
SKU: n/a$140.00 Select options -
Cell Phone / iPhone Holders
iPhone 6Plus Holder
Note: For Phones with Otterbox Defender. Phone Holder Only
iPhone holder is precision manufactured in the USA from high quality U.S. materials. Available in chrome and black finish. Designed for the iPhone 6. Installation is less than 10 minutes. Installation is less than 10 minutes.
Fits: For Harley Davidson Motorcycles & Metric Cruisers
Includes: 1 1/4″ clamp with 1″ sleeve. 90 degree elbow with stainless steel nut.
Provides access to both the auxiliary and charging ports
SKU: n/a$140.00 Select options -
Cell Phone / iPhone Holders
iPhone 7 Holder
Note: For Phones with Otterbox Defender. Phone Holder Only
iPhone holder is precision manufactured in the USA from high quality U.S. materials. Available in chrome and black finish. Designed for the iPhone 6. Installation is less than 10 minutes. Installation is less than 10 minutes.
Fits: For Harley Davidson Motorcycles & Metric Cruisers
Includes: 1 1/4″ clamp with 1″ sleeve. 90 degree elbow with stainless steel nut.
Provides access to both the auxiliary and charging ports
SKU: n/a$140.00 Select options -
Cell Phone / iPhone Holders
iPhone 7Plus Holder
Note: For Phones with Otterbox Defender. Phone Holder Only
iPhone holder is precision manufactured in the USA from high quality U.S. materials. Available in chrome and black finish. Designed for the iPhone 6. Installation is less than 10 minutes. Installation is less than 10 minutes.
Fits: For Harley Davidson Motorcycles & Metric Cruisers
Includes: 1 1/4″ clamp with 1″ sleeve. 90 degree elbow with stainless steel nut.
Provides access to both the auxiliary and charging ports
SKU: n/a$140.00 Select options
-
Drink Holders
Chubby Cups Drink Holder
Fits Most Motorcycles and ATVs
- 6 way mounting system
- Clamp is 1-1/2″
- Comes with 3 Sleeves – 1-1/4″, 1″ and 7/8″
- One Liter Clamp on Drink Holder
- 90 Degree Elbow
- Fits 7/8″, 1″ or 1-1/4″ or 1-1/2″ Bars
- Stainless Steel Spacer
- 3 Foam Liners
- 2 Washers
- Allen Screw Wrench
$70.00 Select options -
Drink Holders
Chubby Cups Jr Rigid Drink Holder
Fits Most Motorcycles and ATVs
- 6 way mounting system
- Clamp is 1-1/2″
- Comes with 3 Sleeves – 1-1/4″, 1″ and 7/8″
- One Liter Clamp on Drink Holder
- 90 Degree Elbow
- Fits 7/8″, 1″ or 1-1/4″ or 1-1/2″ Bars
- Stainless Steel Spacer
- 3 Foam Liners
- 2 Washers
- Allen Screw Wrench
- Available in Chrome or Black
$60.00 Select options -
Drink Holders
Quick Release Drink Holder
- Fits Most Motorcycles and ATVs
- 4 Level – 64 Gear Positions
- Stainless Steel Hardware
- Built in Gripper Pads
- Fits 1/2″ to 2″ Bars
- 20 Ounce to 1 Liter Cans or Bottles
- Flat Black (shown here) $20
- AVAILABLE IN 4 ADDITIONAL COLORS! – Add $10
NOTE: Every Quick Release Includes Built In Gripper Pads
CHECK OUT OUR SHORT DEMO VIDEO BELOW
$20.00 Add to cart -
Drink Holders
Rigid Drink Holder -’14-UP Ultra & Street Glide NEW!
Fits ’14-UP Harley Ultra & Street Glide equipped with 1″ Factory bars
- Fits easily on the handle bar between the bar and the hydraulic clutch cylinder
- Rigid mounted and will not block any gauges
- The cup has 2 liners that will accommodate 12 oz cans up to 24 oz bottles
- Available in Black or Chrome
$60.00 Select options -
Drink Holders
Road Glide Drink Holder ’15-Up
Chubby Cup Rigid Drink Holder – Road Glide – 2015-UP
ONLY DRINK HOLDER ON THE MARKET THAT WILL NOT SCORE YOUR BAR.
Rigid mounted and will not block any gauges
The cup has 3 liners that will accommodate 1 liter, 20oz and 16.9oz bottles / cans
Comes with 1-1/2″ clamp with a 1-1/4″ reducer
Available in Black or Chrome$70.00 Select options -
Drink Holders
Tour Pack Drink Holder ’13-Earlier
- Available in Chrome Finish – Mounts on Right Side
- Comes with bracket, chrome acorn nuts and stainless hardware
- One liter cup with 3 foam liners and instructions for mounting
- Fits all Harley-Davidson Touring Bikes with Tour Pak.
- Accommodate one liter bottles, 16 or 20 oz bottles, or 12 oz cans
- Fits 2013 – Earlier
$80.00 Add to cart -
Drink Holders
Tour Pack Drink Holder ’14-‘UP
- Available for right side
- Comes with bracket, chrome acorn nuts and stainless hardware
- One liter cup with 3 foam liners and instructions for mounting
- Fits all Harley-Davidson Touring Bikes with Tour Pak
- Accommodate one liter bottles, 16 or 20 oz bottles, or 12 oz cans
- Fits 2014 – UP
$80.00 Add to cart -
Drink Holders
Switch Mount Drink Holder
Fits Most Motorcycles
- Rigid
- Includes Hardware for Mounting to Most Bikes
- Includes 2 Spacers
- 3 Foam Insulated Liners
- Fits all Harley-Davidson Bikes
- Accommodate one liter bottles, 16 or 20 oz bottles, or 12 oz cans
- Comes with 2 sets of 1/4″x 20 screws and also has metric screws to fit Honda and most metric bikes
- Comes with 2 attachment plates – One 90 degree and one forward plate
$60.00 Select options -
Cell Phone / iPhone Holders
iPhone 4 Holder
Note: For Phones with Otterbox Defender. Phone Holder Only
- Comes with 1-1/4″ clamp with 1″ sleeve and elbow
- Fits 1″ Handlebars
- Works with Harley-Davidson, Honda, Kawasaki, Suzuki, or Yamaha/Star
- 1 1/4″ clamp with 1″ sleeve. 90 degree elbow with stainless steel nut.
Available in chrome finish. Designed for the iPhone® 4 only. Installation is less than 10 minutes. iPhone® not included.
$125.00 Select options -
Cell Phone / iPhone Holders
iPhone 5 Holder
Note: For Phones with Otterbox Defender. Phone Holder Only
iPhone holder is precision manufactured in the USA from high quality U.S. materials. Available in chrome and black finish. Designed for the iPhone 5/5s. Installation is less than 10 minutes.
Fits: For Harley Davidson Motorcycles & Metric Cruisers
Includes: 1 1/4″ clamp with 1″ sleeve. 90 degree elbow with stainless steel nut.
Provides access to both the auxiliary and charging ports
$125.00 Select options -
Cell Phone / iPhone Holders
iPhone 6 Holder
Note: For Phones with Otterbox Defender. Phone Holder Only
iPhone holder is precision manufactured in the USA from high quality U.S. materials. Available in chrome and black finish. Designed for the iPhone 6. Installation is less than 10 minutes. Installation is less than 10 minutes.
Fits: For Harley Davidson Motorcycles & Metric Cruisers
Includes: 1 1/4″ clamp with 1″ sleeve. 90 degree elbow with stainless steel nut.
Provides access to both the auxiliary and charging ports
$140.00 Select options -
Cell Phone / iPhone Holders
iPhone 6Plus Holder
Note: For Phones with Otterbox Defender. Phone Holder Only
iPhone holder is precision manufactured in the USA from high quality U.S. materials. Available in chrome and black finish. Designed for the iPhone 6. Installation is less than 10 minutes. Installation is less than 10 minutes.
Fits: For Harley Davidson Motorcycles & Metric Cruisers
Includes: 1 1/4″ clamp with 1″ sleeve. 90 degree elbow with stainless steel nut.
Provides access to both the auxiliary and charging ports
$140.00 Select options -
Cell Phone / iPhone Holders
iPhone 7 Holder
Note: For Phones with Otterbox Defender. Phone Holder Only
iPhone holder is precision manufactured in the USA from high quality U.S. materials. Available in chrome and black finish. Designed for the iPhone 6. Installation is less than 10 minutes. Installation is less than 10 minutes.
Fits: For Harley Davidson Motorcycles & Metric Cruisers
Includes: 1 1/4″ clamp with 1″ sleeve. 90 degree elbow with stainless steel nut.
Provides access to both the auxiliary and charging ports
$140.00 Select options -
Cell Phone / iPhone Holders
iPhone 7Plus Holder
Note: For Phones with Otterbox Defender. Phone Holder Only
iPhone holder is precision manufactured in the USA from high quality U.S. materials. Available in chrome and black finish. Designed for the iPhone 6. Installation is less than 10 minutes. Installation is less than 10 minutes.
Fits: For Harley Davidson Motorcycles & Metric Cruisers
Includes: 1 1/4″ clamp with 1″ sleeve. 90 degree elbow with stainless steel nut.
Provides access to both the auxiliary and charging ports
$140.00 Select options